Formation of Ti<Subscript>3</Subscript>SiC<Subscript>2</Subscript> from Ti-Si-TiC powders by pulse discharge sintering (PDS) technique

Ti/Si/TiC powder mixture with molar ratios of 2:2:3 were sintered at various temperatures from 700–1300 °C for 15 min by PDS technique. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used for the evaluation of phase composition in different samples for the understanding of the sintering mechanism for this system. Results showed that Ti₅Si₃ formed as the intermediate phase during sintering. The reaction between Ti₅Si₃ and TiC as well as Si induces the formation of Ti₃SiC₂, and TiSi₂ appears as the byproduct in this process. At temperature above 1000 °C, TiSi₂ reacts with TiC to form Ti₃SiC₂. High Ti₃SiC₂ phase content bulk material can be synthesized at 1300 °C for 15 min.     

Growth and proliferation of bone marrow mesenchymal stem cells affected by type I collagen,fibronectin and bFGF

Bone marrow mesenchymal stem cells (MSCs) can differentiate into a various type cells. It has been identified that MSCs are an attractive cell source for various tissue engineering and play a central role in the repair and regeneration of mesenchymal tissue. Expansion of MSCs in vitro is prerequisite for their applications in tissue engineering. In this study, we evaluated the effects of type I collagen (Col I), fibronectin (Fn) and basic fibroblast growth factor (bFGF) on growth and proliferation of human MSCs (hMSCs) by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphe-nyltetra-zolium bromide (MTT) assay. Our results show that low-dose bFGF (5–20 ng/ml) has a promotion effects for growth and proliferation of hMSCs. The proliferation, however, was back to the level similar to the control one (without bFGF treatment) after exposure to high-dose bFGF (40 ng/ml). Application of Col I, coating on the silicone surface or mixed with medium directly, yielded an obvious decrease in growth and proliferation of hMSCs. Moreover, the inhibitory effects exhibited a dose-dependence manner. On the other hand, Fn coating did not promote the growth and proliferation of hMSCs, and also did not inhibit proliferation, but enhanced the adhesion of hMSCs to silicone surface. These findings indicate that Col I decreases the growth and proliferation of hMSCs and is not suitable for encouraging expansion of hMSCs in vitro. Low-dose bFGF could be preferred as medium supplementation for hMSCs expansion and Fn is a better coating material for hMSCs adhesion.     

An efficient contention resolution algorithm for input queuing atm cross-connect switches

This paper describes an efficient contention resolution algorithm and its distributed implementation for large capacity input queuing cross-connect switches, which will establish virtual paths in future broadband ATM networks. The algorithm dynamically allocates sending time to cells held in input queues when no contention is indicated in the designated output ports. An expression for the mean delay and the cell loss probability for random traffic are derived through an approximate analysis. Input cells are served on a first-come, first-served basis as conventional contention resolution algorithms whose throughput saturates at 58 per cent because of head of line blocking in input queues. The proposed algorithm achieves a maximum throughput of 76 per cent.     

Increase in weld penetration depth by two Nd: YAG laser beams combined

Summary

As part of current R&;D work focused on developing the intelligence of arc welding robots, this paper deals with the problem of weldpool sensing and control. To obtain high‐quality welding, it is important to control the weldpool depth in robot welding regardless of any external disturbance, such as irregular groove gap. The method of controlling the weldpool depth without a mathematical model is discussed.

Since it is difficult to measure the weldpool depth directly, it is estimated from the weldpool surface shape, groove gap, and welding current. A neural network is used to estimate the weldpool depth without a mathematical model. The weldpool depth is controlled from the output of the neural network using the fuzzy controller. Neural network and fuzzy controller application is validated in welding experiments.     

Annealing effect on temperature coefficient of resistivity in La1−xSrxMnO3 ceramics

We investigated annealing effects of La_1?xSr_xMnO₃ (x = 0–0.6) on electrical resistivity and the temperature coefficient of resistivity (TCR). The annealed samples’ resistivity was lower than those of non-annealed samples. For example, annealing changed the resistivity of x = 0.3 at 25 °C from 4.50 × 10^?5 to 3.71 × 10^?5 Ω m. Remarkable difference in TCR was observed after annealing, for x = 0.3, 0.45, and 0.5. For x = 0.3, the TCR after annealing was 4000 ppm/°C, which was 1250 ppm/°C greater than that before annealing. We investigated (1) crystal phase, (2) Mn average valence, (3) Mott insulator–metal transition temperature, and (4) microstructure. The microstructure was remarkably varied for annealed x = 0.3 and 0.5. The average grain size of the x = 0.3 increased from 1.60 up to 2.38 μm. Results show that annealing affects resistivity and TCR because of grain growth during annealing.     

Conditional transformation of immunoglobulin mutation pattern from gene conversion into point mutation by controlling XRCC3 expression in the DT40 B cell line

A hypermutating B cell line DT40 is useful for screening antibodies and improving affinity of the selected antibodies in vitro. To perform affinity maturation efficiently, we generated an engineered DT40 line whose immunoglobulin mutation pattern can be transformed from gene conversion into point mutation by conditional suppression of XRCC3 expression.     

Development of multianode photomultiplier tube

We have developed a multianode photomultiplier tube (MAPMT) which has a sensitive cathode diameter of 36 mm and an anode with 88 segments. The position sensitivity of the tube was studied by using light from a LED and scintillation light from a scintillation-fiber bundle. We observed particle tracks for the first time by using a single photomultiplier tube.     

Nanosecond and femtosecond mass spectroscopic analysis of a molecular beam produced by the spray-jet technique

The spray-jet molecular beam apparatus enabled us to produce a molecular beam of non-volatile molecules under high vacuum from a sprayed mist of sample solutions. The apparatus has been used in spectroscopic studies and as a means of molecular beam deposition. We analyzed the molecular beam, consisting of non-volatile, solvent, and carrier-gas molecules, by using femtosecond- and nanosecond- laser mass spectroscopy. The information thus obtained provided insight into the molecular beam produced by the spray-jet technique.     

Accelerated Genetic Programming of Polynomials

An accelerated polynomial construction technique for genetic programming is proposed. This is a horizontal technique for gradual expansion of a partial polynomial during traversal of its tree-structured representation. The coefficients of the partial polynomial and the coefficient of the new term are calculated by a rapid recurrent least squares (RLS) fitting method. When used for genetic programming (GP) of polynomials this technique enables us not only to achieve fast estimation of the coefficients, but also leads to power series models that differ from those of traditional Koza-style GP and from those of the previous GP with polynomials STROGANOFF. We demonstrate that the accelerated GP is sucessful in that it evolves solutions with greater generalization capacity than STROGANOFF and traditional GP on symbolic regression, pattern recognition, and financial time-series prediction tasks.